PWM SPECS (may vary in appearance:
TECHNICAL SPECIFICATIONS:
Pulse width modulator is air cooled; no fan needed
Power Requirement
DC 10-50 V
Rated Current
40 A (Maximum Output Current)
Frequency
12000 Hz
Control Motor Power
0.01-2000 W
12 V: 480 W (max), 24 V: 960 W (max)
36 V: 1440 W (max), 50 V: 2000 W (max)
Regulation Range
5-100%
PCB Size
90 x 51 mm (inch: 3.5" x 2")
Case Size
105 x 55 x 40 mm (inch: 4" x 2.2" x 1.6")
Weight
130 g
Instructions included
A DC ammeter is recommenced to be used with this controller. BUY AMMETER HERE:
https://hhoproducts.ecrater.com/p/8483823/hho-dry-cell-kit-50-amp
Do NOT mount near high heat or water prone areas or remove control knob
IMPORTANT warranty information: All PWM's are pretested. Damage to controller due to improper connections voids warranty. Installation should be performed by persons familiar with DC voltage applications.
